Tsatu logo
ISSN: 2524-0714

Please use this identifier to cite or link to this item: http://elar.tsatu.edu.ua/handle/123456789/3103
Title: Динамика изменения выходных характеристик гидровращателя планетарного типа в составе гидроагрегата с приводным двигателем
Other Titles: Dynamics of changes in the output characteristics for the planetary hydraulic rotator as a part of the hydraulic unit with the driving engine
Authors: Панченко, Анатолий Иванович
Панченко, Анатолій Іванович
Panchenko, Anatolii
Волошина, Анжела Анатольевна
Волошина, Анжела Анатоліївна
Voloshyna, Anzhela
Панченко, Игорь Анатольевич
Панченко, Ігор Анатолійович
Panchenko, Ihor
Keywords: гидроагрегат;насосная станция мобильной машины;приводной двигатель дизельного типа;нерегулируемый шестеренный насос;предохранительный клапан непрямого действия;гидравлический вращатель планетарного типа;динамика;выходные характеристики;hydraulic unit;pumping station of the mobile machine;driving diesel engine;nonadjustable gear pump;indirect acting relief valve;planetary hydraulic rotator;dynamics;output characteristics
Issue Date: 2016
Series/Report no.: MOTROL. Commission of Motorization and Energetics in Agriculture;Vol. 18, No. 1 (С. 17-27)
Abstract: RU: Обоснованы и приняты необходимые начальные условия, ограничения и допущения, позволяющие моделировать рабочие процессы, происходящие в серийном и модернизированном гидравлических вращателях планетарного типа с большим рабочим объемом свыше 6000 см3, работающих в составе гидроагрегата, включающего насосную станцию мобильной машины с разомкнутой циркуляцией потока, с приводным двигателем дизельного типа, нерегулируемым шестеренным насосом и предохранительным клапаном с помощью пакета имитационного моделирования Vissim. Моделирование переходных процессов, происходящих в гидровращателях планетарного типа, работающих в составе гидроагрегата, позволило исследовать динамику изменения выходных характеристик серийного и модернизированного гидровращателей планетарного типа, работающих в составе гидроагрегата, с учетом их конструктивных особенностей, а также взаимосвязи всех элементов гидроагрегата и их взаимодействия с рабочей жидкостью. Результаты моделирования работы гидравлического вращателя планетарного типа в составе гидроагрегата, включающего насосную станцию мобильной машины с разомкнутой циркуляцией потока, с приводным двигателем дизельного типа, нерегулируемым шестеренным насосом и предохранительным клапаном, во время пуска, подтверждают результаты теоретических и параметрических исследований по обоснованию геометрических параметров вытеснительной и распределительной систем модернизированного гидровращателя. EN: The article presents some necessary starting conditions as well as limits and assumptions allowing to model the working processes which take place inside the serial and updated planetary hydraulic rotators with the large volumes over 6000 cm3. The rotators work as a part of the hydraulic unit which includes a pumping station of the mobile machine with an open flow circulation, a driving diesel engine, a nonadjustable gear pump and a relief valve. The starting conditions have been substantiated and accepted for the modeling with the help of Vissim simulation modeling software. The modeling covered transient processes which take place inside the planetary hydraulic rotators working as a part of the hydraulic unit. This enabled to study the dynamics of changes in the output characteristics for the serial and updated hydraulic rotators. The design features of the hydraulic rotators as well as the relationship between all the studied hydraulic system elements have been taken into account while research. The modeling describes the operation of the planetary rotator as a part of hydraulic unit. It consists of a pumping station of the mobile machine with an open flow circulation, a driving diesel engine, a nonadjustable gear pump and a relief valve. The results of the modeling during starting confirm the results of theoretical and parametric research aimed at the substantiation of the geometrical parameters of the displacing and distribution systems of the updated hydraulic rotator.
URI: http://elar.tsatu.edu.ua/handle/123456789/3103
Appears in Collections:кафедра Мехатронні системи та транспортні технології

Files in This Item:
File Description SizeFormat 
46-17-28.pdf678.05 kBAdobe PDFThumbnail
View/Open
Show full item record ???jsp.display-item.check???


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.